P052F
Glow Plug Control Module 1 System Voltage
Diesel glow plugs are switched by a separate glow plug control module fed from the battery, with its own ground, a command from the engine module and a diagnostic line back. P052F means its supply voltage is out of range. Ford's 6.7 L and 3.0 L Power Stroke set it below 6.5 V, above 16.5 V or with an open supply, after about 1 s, continuously. An FCA bulletin shows P052F together with all six glow plug open codes P0671–P0676, because without supply no current flows – check main feed, connector and grounds first. GM does not use it.
Possible causes
- Main feed to the module open or high-resistance (fuse, connector, corroded ring terminal) high
- Poor ground of the glow plug module medium
- System voltage too low or too high (weak battery, regulator fault) medium
- Glow plug module faulty internally low
Symptoms
- Check engine light on
- Hard cold start, long cranking, white smoke
- Several glow plug codes at once
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P052F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf
- static.nhtsa.gov/odi/tsbs/2021/MC-10230186-9999.pdf
- static.nhtsa.gov/odi/tsbs/2022/MC-10229496-9999.pdf
- saabwisonline.com/9-3-9440/2006/3-electrical-system/wiring-harness-and-components/control-module/technical-description/control-module-glow-plug-596
- law.cornell.edu/regulations/california/13-CCR-1968.2