OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0528

Fan Speed Sensor Circuit No Signal

Engine-driven fans with an electronically controlled viscous clutch (GM petrol SUVs and pick-ups 2004–2006, GM Duramax, Ford 6.7 L Power Stroke) have a Hall sensor reporting fan speed; the fan checks P0483, P0494 and P0495 need it. P0528 means no pulses arrive from the sensor although the fan should be turning. No manufacturer document available to us uses P0528 – GM detects exactly this state (fan below 4 rpm with the engine running) but reports it as P0526. CARB requires input components to be checked for open and short circuits.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number5 / 28

Possible causes

  • Sensor faulty high
  • Wire open or connector off medium
  • Fan or clutch really not turning medium

Symptoms

  • Check engine light (depending on the maker)
  • Fan permanently on or not at all
  • Tendency to overheat

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0528

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication