P0526
Fan Speed Sensor Circuit
Engine-driven fans with an electronically controlled viscous clutch (GM petrol SUVs and pick-ups 2004–2006, GM Duramax, Ford 6.7 L Power Stroke) have a Hall sensor reporting fan speed; the fan checks P0483, P0494 and P0495 need it. P0526 means no usable signal although the clutch is driven: GM Duramax below 500 rpm with fan duty at least 36 % for 2 s; the 6.6 L LML distinguishes a level stuck low or high; GM petrol V8s set it when no pulses arrive with the engine running. Type B, two trips. GM also reports a missing signal under P0526. A GM bulletin for 2011–2013 Duramax vans and pick-ups names loud fan noise and weak air conditioning at low speed.
Possible causes
- Hall sensor at the fan clutch faulty high
- Wiring or connector (chafing at the shroud, corrosion) medium
- Clutch not turning despite command medium
- Engine module or supply low
Symptoms
- Check engine light on
- Fan permanently on or off, loud fan noise
- Weak air conditioning at low speed, overheating under load
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0526
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.