P0523
Engine Oil Pressure Sensor/Switch A High
The oil pressure sensor matters for emissions control because modern engines use it as an input – for two-stage or regulated oil pumps, hydraulic cam phasers and GM's cylinder deactivation, whose lifters switch by oil pressure. P0523 means the signal voltage is above its limit: GM 2018 above 95 % of the 5 V reference, GM 2006 above 4.89 V, Ford petrol above 4.75 V, Ford diesel above 4.992 V, about 5 s. Typical are an open sensor ground or a signal shorted to 5 V or battery voltage. Real excess pressure is not reported here – Ford uses P055F for that. GM's 2006 V8s used the warning lamp only with cylinder deactivation.
Possible causes
- Sensor ground open high
- Signal shorted to 5 V reference or battery voltage medium
- Sensor faulty internally medium
- Oil or moisture in the connector low
Symptoms
- Check engine light (depending on the maker)
- Oil pressure gauge at maximum
- Cam phasing or cylinder deactivation possibly restricted
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0523
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2018/18OBDG03A Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2006/2006file10.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/OBD-Operations-Summary-Gasoline-2020-2023.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf