P0521
Engine Oil Pressure Sensor/Switch A Range/Performance
The oil pressure sensor matters for emissions control because modern engines use it as an input – for two-stage or regulated oil pumps, hydraulic cam phasers and GM's cylinder deactivation, whose lifters switch by oil pressure. P0521 is the plausibility check. With the engine off the sensor must read about zero (GM: above 40 kPa after 10 s is a fault, Ford diesel above 70 kPa); with it running the value is compared with a model of speed and oil temperature (GM single-stage pump ±50 kPa). GM checks two-stage pumps against limits per stage and calibrates P0521 with the pump valve – so a real pressure fault can also set it. GM type B, two trips.
Possible causes
- Sensor drifting or stuck (offset) high
- Oil pump control valve or two-stage pump stuck in the wrong stage medium
- Wrong viscosity, low oil level or foaming oil medium
- Worn oil pump or bearings low
Symptoms
- Check engine light on
- Oil pressure reading implausible or fluctuating
- Cylinder deactivation or cam phasing possibly disabled
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0521
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2018/18OBDG03A Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2019/19OBDG03B Diagnostics.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/OBD-Operations-Summary-Gasoline-2020-2023.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2004/2004file8.pdf