P0517
Battery Temperature Sensor Circuit High
The battery temperature sensor – usually an NTC in the battery tray or inside an intelligent battery sensor on the negative terminal – lets the module adjust the charging voltage (higher when cold, lower when warm) and supports battery management and start-stop. P0517 means the signal voltage is above its limit, close to the reference; with an NTC that means very cold, or more often an open circuit – sensor unplugged, wire broken – or a short to positive. The module then assumes a cold battery and may charge too high. No manufacturer document available to us names this code; the description follows CARB's input component rules. A fixed substitute temperature is then used.
Possible causes
- Sensor unplugged or forgotten after a battery change high
- Wire or connector open or corroded high
- Sensor open internally medium
- Signal line shorted to positive low
Symptoms
- Possibly check engine light
- Charging voltage too high
- Battery gassing or overcharged
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0517
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.