P0516
Battery Temperature Sensor Circuit Low
The battery temperature sensor – usually an NTC in the battery tray or inside an intelligent battery sensor on the negative terminal – lets the module adjust the charging voltage (higher when cold, lower when warm) and supports battery management and start-stop. P0516 means the signal voltage stays below its limit for a minimum time; with an NTC in a voltage divider a low voltage means very hot, or more often a signal line shorted to ground or an internal short. The module then assumes a hot battery and may charge too little. No manufacturer document available to us names this code; the description follows CARB's input component rules. A fixed substitute temperature is then used.
Possible causes
- Signal line shorted to ground (chafed at the battery tray) high
- Sensor shorted internally medium
- Moisture or acid in the connector medium
- Module low
Symptoms
- Possibly check engine light
- Charging voltage too low
- Battery weak, starting problems in the cold
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0516
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.