P0515
Battery Temperature Sensor Circuit
The battery temperature sensor – usually an NTC in the battery tray or inside an intelligent battery sensor on the negative terminal – lets the module adjust the charging voltage (higher when cold, lower when warm) and supports battery management and start-stop. P0515 is its general circuit fault – open or short – without separating low and high; the charging voltage is then fixed or conservative. No manufacturer document available to us names this code; the description follows CARB's input component rules. A fixed substitute temperature is then used.
Possible causes
- Sensor or connector corroded (battery acid) high
- Wire open or chafed medium
- Sensor not plugged in after a battery change medium
- Module low
Symptoms
- Possibly check engine light
- Charging voltage not temperature-compensated
- Start-stop or battery management limited
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0515
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.