OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P04FF

Catalyst Heater Circuit Performance Bank 2

The catalyst heater on bank 2 is electrically intact but does not deliver the expected thermal effect - measured catalyst light-off time is longer than calibrated. Heater element ageing, increased contact resistance, or a partial winding failure are typical causes.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / FF

Possible causes

  • Heater element aged - reduced power output high
  • Increased contact resistance in supply medium

Symptoms

  • Check engine light on
  • Failed emissions inspection
  • Possibly slightly increased fuel consumption
  • Sulfur (rotten egg) smell from exhaust under load

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended
  • Estimated cost: 400–2500 €
  • Estimated time: 2–6 h
  • Component: electric catalyst heater b2
  • MIL / check engine light
  • emissions-relevant

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication