OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P04FE

Catalyst Heater Circuit Performance Bank 1

An electrically heated catalyst has a heating disc ahead of the catalyst so that it works soon after a cold start; Emitec's EMICAT runs on 12, 24 or 48 V and draws up to about 300 A. It is in series production on 48-volt mild-hybrid diesel vans since 2022. P04FE concerns the heated catalyst of bank 1. The code is the function check: the circuit is electrically sound but the effect does not fit – for example the energy delivered in a time window after switch-on stays below target, which a Toyota patent evaluates as a ratio, or the catalyst temperature does not rise as modelled. Ageing of the disc raises its resistance. The pure temperature result code is P0424/P0434. No manufacturer document available to us uses this code – Ford, for example, states that heated catalyst monitoring is not supported – so thresholds and warning-lamp logic are not documented; the description follows CARB and patents for the same part.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / FE

Possible causes

  • Heating disc aged (resistance increased, cracks, electrode damage) high
  • Supply drops under load (cold or weak 48 V battery, contact resistance) medium
  • Catalyst or exhaust temperature sensor implausible low
  • Software or calibration low

Symptoms

  • Check engine light on (depending on the maker)
  • Higher emissions after a cold start
  • Otherwise usually unremarkable

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P04FE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication