P04FA
EGR A Control Temperature Too High
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. P04FA is a protective check of the electrically driven EGR valve A (DC motor on an H-bridge with position sensor): the module detects overtemperature or thermal overload of the actuator, modelled from current, actuating work and position behaviour, and limits or switches off EGR. Ford petrol engines from 2020 run it continuously with 4 s to fault above 8.25 V and 400 rpm. Pierburg documents heat damage to VW's 12 V electric EGR valves. EGR then closes, NOx rises.
Possible causes
- EGR valve stiff from coking (motor working against resistance) high
- High thermal load (full load, poor valve cooling, low coolant) medium
- Valve motor or H-bridge driver faulty (overcurrent) medium
- Module software low
Symptoms
- Check engine light on
- Rough idle or jerking if the valve hangs
- Loss of power, possibly limp mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P04FA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.