OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P04EF

EVAP System Very Small Leak Detected - Fresh Air Side

Hybrids with a sealed fuel tank have a valve separating the tank from the charcoal canister and its vent side. CARB allows such sections to be leak-checked separately with their own codes; a Ford patent checks the tank side via tank pressure with the valve closed and the canister side with a leak check module. Conventional systems report the same leak as P0442, P0455 or P0456. P04EF reports a very small leak (0.020 in) in the canister and vent section; the leak check module compares the vacuum against a 0.020 in reference and the section does not reach it. On Ford's C-Max, Fusion and MKZ hybrids and Energi a leaking purge valve is the typical trigger, fixed per bulletin with the valve and software.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / EF

Possible causes

  • Purge valve not sealing high
  • Vent valve or leak check module leaking medium
  • Hairline crack or leaking connections at the canister medium
  • Module software (misjudgement) low

Symptoms

  • Check engine light on
  • EVAP readiness not set
  • No change in driving

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P04EF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication