OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P04ED

EVAP System Large Leak Detected - Fresh Air Side

Hybrids with a sealed fuel tank have a valve separating the tank from the charcoal canister and its vent side. CARB allows such sections to be leak-checked separately with their own codes; a Ford patent checks the tank side via tank pressure with the valve closed and the canister side with a leak check module. Conventional systems report the same leak as P0442, P0455 or P0456. P04ED reports a large leak in the canister and vent section: the leak check module builds up no meaningful vacuum – line off, canister broken, vent valve open. Purging may be suspended. No manufacturer document available to us names this code; the description follows CARB and the Ford patent.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / ED

Possible causes

  • Line at the canister or leak check module off or broken high
  • Vent valve or leak check module not closing medium
  • Canister housing cracked medium
  • Purge valve stuck open low

Symptoms

  • Check engine light on
  • Possibly check fuel cap message or slight fuel smell
  • No change in driving

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P04ED

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication