P04E7
EGR Temperature Sensor D Circuit Low
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. Sensor D is the fourth of up to four EGR temperature sensors, conceivable on engines with high- and low-pressure EGR and a sensor before and after each cooler; it is usually an NTC whose low voltage means hot. No manufacturer document available to us uses sensor D; the description follows CARB and Ford's checks on sensor B as a comparison. P04E7 means the signal is below its lower limit – a signal line shorted to ground or, theoretically, an extremely high temperature. For sensor B Ford uses below 0.19 V. A substitute value is used and EGR may be reduced.
Possible causes
- Signal line chafed against ground or the engine high
- Sensor shorted internally medium
- Water or corrosion in the connector medium
- Module input faulty low
Symptoms
- Check engine light on
- Usually no change in driving
- EGR possibly reduced, higher NOx
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P04E7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.