P04E5
EGR Temperature Sensor D Circuit
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. The code standard allows up to four EGR temperature sensors, A to D – for example before and after the cooler, or in the high- and low-pressure circuits; which is which depends on the maker. Sensor D is the fourth of them, usually an NTC whose low voltage means hot. P04E5 is its general circuit fault, conceivable on systems with high- and low-pressure EGR and two sensors per circuit. No manufacturer document available to us uses sensor D – GM, Ford and FCA use at most A to C – so the description follows CARB's requirement to check input circuits for continuity and range. EGR then uses a substitute value or is switched off.
Possible causes
- Wire or connector fault high
- Sensor faulty medium
- Engine module low
Symptoms
- Check engine light on
- Usually no change in driving (EGR on a substitute value or off)
- Possibly EGR flow or cooler codes (P0401, P2457)
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P04E5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.