P04E0
EVAP System Purge Control Valve A Stuck Closed
Purge valve A is the main EVAP purge valve between charcoal canister and intake manifold (on turbo engines the low-load path); its electrical circuit faults are P0443, P0458 and P0459. No manufacturer document available to us uses this code; the description follows GM's comparable check P0496, Subaru's valve B counterpart P04AE and CARB's purge flow requirement. P04E0 means valve A does not open although it is driven: no vacuum builds up in the tank and the mixture does not react while purging – CARB requires missing purge flow to be detected. The canister is then not purged and saturates, causing fuel smell and early nozzle shut-off.
Possible causes
- Purge valve A stuck closed (gummed, charcoal dust, spring or armature) high
- Purge line kinked or blocked medium
- Canister or vent blocked low
- Tank pressure sensor faulty low
Symptoms
- Check engine light on
- Fuel smell
- Nozzle clicks off early when refuelling
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P04E0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.