P04D7
Exhaust Brake Input Circuit Intermittent/Erratic
The exhaust brake input is the driver's request for the exhaust or engine brake – a button or stalk on diesel pick-ups and trucks. On GM's 6.6-litre L5P, for example, the button must be pressed again after every start. GM uses the exhaust brake status as an enable condition for other emission monitors, which is why CARB requires the input to be checked. No manufacturer table available to us lists P04D3–P04D7; Hino's J08E truck engine checks P04D5 before its exhaust brake function test. P04D7 means the signal changes state abruptly or too often, or shows brief excursions too short for the low/high codes – bouncing contacts or a loose connection.
Possible causes
- Loose contact at the button or module connector high
- Worn or bouncing button medium
- Chafed wire with intermittent short medium
- Moisture or corrosion low
Symptoms
- Exhaust brake cannot be switched on, button lamp off or wrong
- Possibly check engine light
- More load on the service brakes downhill
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P04D7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.