P04D2
EGR Temperature Sensor C Circuit Intermittent/Erratic
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. The code standard allows up to four EGR temperature sensors, A to D – for example before and after the cooler, or in the high- and low-pressure circuits; which is which depends on the maker. Sensor C is the third of them, usually an NTC whose low voltage means hot. P04D2 means brief excursions out of range or implausibly fast temperature jumps. FCA lists sensor C codes for its part 68142905A (Ram 2014 6.4 and 3.0 litre, Jeep and Dodge 3.6 Pentastar 2016) together with P040B, P0401 and P2457. GM checks sensor B in the same way with a jump test (40 of 50 samples). A Mack/Volvo truck bulletin names worn connector contacts at the EGR temperature sensor as a typical cause of wrong readings.
Possible causes
- Loose contact or fretting at the connector pins high
- Wire chafing intermittently (vibration, heat) medium
- Sensor with an internal contact fault medium
Symptoms
- Check engine light on, may come and go
- Usually no change in driving
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P04D2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.