P04D0
EGR Temperature Sensor C Circuit Low
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. The code standard allows up to four EGR temperature sensors, A to D – for example before and after the cooler, or in the high- and low-pressure circuits; which is which depends on the maker. Sensor C is the third of them, usually an NTC whose low voltage means hot. P04D0 means its signal voltage is below the lower limit – extremely hot, or more often the signal line shorted to ground or the sensor shorted. FCA lists sensor C codes for its part 68142905A (Ram 2014 6.4 and 3.0 litre, Jeep and Dodge 3.6 Pentastar 2016) together with P040B, P0401 and P2457. No threshold is published for sensor C; for sensor B Ford diesels use below 0.19 V and GM diesels below 164 Ω.
Possible causes
- Signal line shorted to ground (chafed hot harness) high
- Sensor shorted internally medium
- Moisture or corrosion in the connector medium
- Engine module input low
Symptoms
- Check engine light on
- Usually no change in driving (EGR on a substitute value or off)
- Possibly EGR flow or cooler codes (P0401, P2457)
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P04D0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.