OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P04CF

EGR Temperature Sensor C Circuit Range/Performance

Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. The code standard allows up to four EGR temperature sensors, A to D – for example before and after the cooler, or in the high- and low-pressure circuits; which is which depends on the maker. Sensor C is the third of them, usually an NTC whose low voltage means hot. P04CF is its plausibility check: the signal is electrically valid but does not fit the model or other temperatures. Comparable checks on sensors A and B compare it after a long stop with coolant and intake air, or look for a temperature change during EGR operation (Ford diesels, GM diesels above 10 °C). No manufacturer document available to us uses P04CF; FCA lists P040B as the range code for its sensor C part.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / CF

Possible causes

  • Sensor drifting or sluggish (soot, ageing) high
  • Contact resistance at the connector medium
  • EGR cooler or valve problem changes the real temperature medium
  • Comparison sensor (coolant, intake air, exhaust) faulty low

Symptoms

  • Check engine light on
  • Usually no change in driving (EGR on a substitute value or off)
  • Possibly EGR flow or cooler codes (P0401, P2457)

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P04CF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication