P04C3
Fuel Fill Door Lock Position Sensor/Switch Circuit
On plug-in hybrids with a sealed, pressurised tank, pressing the fuel button (open request) starts a refuelling mode: the module opens the tank valve, releases the pressure into the charcoal canister and only then unlocks the filler door via an electric actuator (Ford patent). The lock position sensor in the actuator reports locked or unlocked – not to be confused with the door position sensor (open or closed, P04B7–P04BA). P04C3 is its general circuit fault. No manufacturer document available to us uses this code; the description follows CARB's rules for input and output components and patents on the door actuator.
Possible causes
- Wire or connector to the lock sensor open or shorted high
- Switch in the actuator faulty (usually replaced with the actuator) medium
- Water ingress medium
- Module low
Symptoms
- Filler door does not unlock or lock reliably
- Refuelling system message
- Possibly check engine light
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P04C3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.