P04C2
Fuel Fill Door Unlock Control Circuit High
On plug-in hybrids with a sealed, pressurised tank, pressing the fuel button (open request) starts a refuelling mode: the module opens the tank valve, releases the pressure into the charcoal canister and only then unlocks the filler door via an electric actuator (Ford patent). P04C2 concerns the unlock circuit: the voltage in the control circuit is above the expected range – typically a short to positive, or with a low-side driver an open load circuit. Mitsubishi's Outlander PHEV from 2023 checks it with the power on, not only in refuelling mode. Mitsubishi shows a 'refuelling system service required' message for these codes and gives no drive-cycle pattern.
Possible causes
- Control line shorted to battery voltage high
- Actuator load circuit open (seen as high with a low-side driver) medium
- Relay sticking or faulty medium
- Module faulty low
Symptoms
- Filler door does not open or lock as commanded
- Refuelling system message in the instrument cluster
- Possibly check engine light
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P04C2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.