OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P04B5

Fuel Fill Door Stuck Open

Plug-in and some full hybrids keep the fuel tank sealed while driving, separated from the charcoal canister by a valve. When the driver presses the fuel button, the system opens the valve, lets the pressure escape into the canister and only then unlocks the filler door. A switch reports whether the door is open or closed, so that the tank can be sealed again afterwards. P04B5 means the door is not detected as closed and latched although the system expects it to be. Ford (C-Max and Fusion Energi 2013–17, MKZ hybrid) names a door not fully latched or opened by an accidental button press, with a message and the code in the third drive cycle; on the MKZ a door pressed during unlocking can confuse the latch – reset by pressing the button and waiting 12 s. Stellantis re-enables the check only after more than 16 miles and names a missing plunger or magnet, the cap tether blocking it, or a short to ground of the status line.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / B5

Possible causes

  • Door not fully latched after refuelling or opened by an accidental button press high
  • Fuel cap tether blocking the plunger or latch medium
  • Plunger missing or loose, magnet or latch motor shifted or faulty medium
  • Status line of the door switch shorted to ground low

Symptoms

  • Check engine light on (depending on the maker)
  • Fuel door open message in the instrument cluster
  • Door stays open or does not latch

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P04B5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication