OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P04B4

Refueling Vapor Control Valve Stuck Closed

Plug-in and some full hybrids keep the fuel tank sealed while driving, separated from the charcoal canister by a valve. When the driver presses the fuel button, the system opens the valve, lets the pressure escape into the canister and only then unlocks the filler door. A switch reports whether the door is open or closed, so that the tank can be sealed again afterwards. P04B4 is the function check of the valve between tank and canister: after the open command the tank pressure must move towards canister or ambient pressure, and if the rate of change stays below a threshold the valve counts as stuck closed (Ford patent). The tank then cannot be depressurised, the door does not unlock or only after a long delay, and during refuelling vapour cannot reach the canister. No manufacturer document available to us uses this code.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / B4

Possible causes

  • Valve mechanically stuck (dirt, fuel in the valve, ice) high
  • Vapour line kinked or blocked, liquid separator blocked medium
  • Canister clogged (charcoal dust, liquid fuel) low
  • Tank pressure sensor sluggish or wrong low

Symptoms

  • Check engine light on
  • Filler door does not open after pressing the button, or only after a long delay
  • Nozzle clicks off early when refuelling
  • Hissing or vapour when opening the cap

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P04B4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication