OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P04AF

EVAP System Purge Control Valve B Stuck Closed

The evaporative emission (EVAP) system stores fuel vapour from the tank in a charcoal canister; a purge valve lets the engine draw it off, and a vent valve opens the canister to fresh air. Purge valve B is a second electric purge valve, usually for the high-load purge line of a turbo engine, which purges to the compressor inlet when there is boost in the manifold (Ford patent). Many makers solve this path with one purge valve and passive check valves instead – Ford tests it as P04F0 – and then have no valve B. CARB requires every purge path to be checked. P04AF is the flow check of the high-load path: under boost the module opens purge valve B, and if tank pressure or mixture do not react, the valve is stuck closed or the path is blocked – a FCA patent describes such a stepwise test. The canister is then not purged under boost and can saturate on load-heavy driving. No manufacturer document available to us uses this code; the description follows CARB and the comparable purge valve A checks (for GM P0443/P0458/P0459).

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / AF

Possible causes

  • Purge valve B stuck closed (gummed, dirt) high
  • Line to the compressor inlet off, kinked or blocked, check valve sticking medium
  • Engine module software or false trigger low
  • Canister or vent blocked low

Symptoms

  • Check engine light on
  • Fuel smell
  • EVAP readiness not set

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P04AF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication