P04AD
EVAP System Purge Control Valve B Circuit High
The evaporative emission (EVAP) system stores fuel vapour from the tank in a charcoal canister; a purge valve lets the engine draw it off, and a vent valve opens the canister to fresh air. Purge valve B is a second electric purge valve, usually for the high-load purge line of a turbo engine, which purges to the compressor inlet when there is boost in the manifold (Ford patent). Many makers solve this path with one purge valve and passive check valves instead – Ford tests it as P04F0 – and then have no valve B. CARB requires every purge path to be checked. P04AD means the control wire of purge valve B is shorted to positive: the valve cannot open and the driver may switch off for protection, so the canister is purged less under load. No manufacturer document available to us uses this code; the description follows CARB and the comparable purge valve A checks (for GM P0443/P0458/P0459).
Possible causes
- Control wire touching battery positive high
- Coil shorted internally (driver overcurrent) medium
- Corrosion in the connector medium
- Driver in the engine module low
Symptoms
- Check engine light on
- EVAP readiness not set
- Usually no change in driving
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P04AD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.