OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P04A6

Exhaust Pressure Control Valve B Position Sensor/Switch Circuit

An exhaust pressure control valve is an electrically driven flap in the exhaust with a position sensor or end-position switch, usually inside the actuator. Valve B is the second such flap; Bentley's V8 assigns A to bank 1 and B to bank 2. Documented uses are the flap behind the particulate filter of VW's and Audi's 2.0 TDI, which raises back pressure for the low-pressure EGR, and the sound flaps of Audi and Bentley. P04A6 is the general circuit fault or open circuit of valve B's position sensor. Bentley reports bank 2 sensor faults as P04A8 instead. No manufacturer document available to us uses this code; the description mirrors the valve A counterpart P048B and CARB's monitoring requirement for input and output components.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / A6

Possible causes

  • Actuator with integrated position sensor faulty high
  • Connector or wire at the underbody corroded, chafed or open high
  • Engine module (sensor supply or input) low

Symptoms

  • Check engine light on
  • Flap without function, exhaust sound changed
  • VW/Audi TDI: EGR fault P0401 possible

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P04A6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication