P04A2
Exhaust Pressure Control Valve B High
An exhaust pressure control valve is an electrically driven flap in the exhaust with a position sensor or end-position switch, usually inside the actuator. Valve B is the second such flap; Bentley's V8 assigns A to bank 1 and B to bank 2. Documented uses are the flap behind the particulate filter of VW's and Audi's 2.0 TDI, which raises back pressure for the low-pressure EGR, and the sound flaps of Audi and Bentley. P04A2 means valve B's control circuit is high, i.e. shorted to positive; VW documents the valve A counterpart P0478 on the 2015 2.0 TDI, where the actuator is replaced. No manufacturer document available to us uses this code; the description mirrors the valve A counterpart P0478 and CARB's monitoring requirement for input and output components.
Possible causes
- Control wire shorted to positive high
- Actuator electronics faulty medium
- Connector corroded or wet medium
Symptoms
- Check engine light on
- Flap without function, exhaust sound changed
- VW/Audi TDI: EGR fault P0401 possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P04A2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.