P04A0
Exhaust Pressure Control Valve B Range/Performance
An exhaust pressure control valve is an electrically driven flap in the exhaust with a position sensor or end-position switch, usually inside the actuator. Valve B is the second such flap; Bentley's V8 assigns A to bank 1 and B to bank 2. Documented uses are the flap behind the particulate filter of VW's and Audi's 2.0 TDI, which raises back pressure for the low-pressure EGR, and the sound flaps of Audi and Bentley. P04A0 is the function check of valve B: it is electrically sound but does not reach its target or full travel. Bentley documents it on the V8 of 2023 for bank 2 (with P04A8) and on the Bentayga (with P049F): the code sets when the actuator does not run through its full range, caused by sludge at the commutator or a stiff flap.
Possible causes
- Flap actuator worn, commutator dirty high
- Flap shaft stiff (corrosion, deposits) medium
- Wiring or contacts medium
- Basic setting not carried out low
Symptoms
- Check engine light on
- Flap without function, exhaust sound changed
- VW/Audi TDI: EGR fault P0401 possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P04A0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.