OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P049C

EGR B Flow Excessive Detected

Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. Circuit B is the second EGR path; on diesels with two circuits it is the low-pressure EGR, which takes exhaust after the particulate filter and feeds it in before the turbo compressor (GM diesels 2016–18, FCA's 2.2 and 3.0 diesels). P049C means too much flow in circuit B – fresh air mass drops further than modelled, or EGR flows with the low-pressure valve closed; CARB explicitly requires a leaking valve to be detected. No manufacturer document available to us uses P049C; the closest is FCA's P045E for a low-pressure valve stuck open. Smoke, lack of power and rough idle follow, and low-pressure EGR is switched off.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 9C

Possible causes

  • Low-pressure EGR valve stuck open or not sealing (soot) high
  • Position sensor B implausible (valve seemingly closed) medium
  • Leak between exhaust side and intake low
  • Air mass meter reading too low low

Symptoms

  • Check engine light on
  • Lack of power, black smoke
  • Rough idle or misfire, in extreme cases stalling

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P049C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication