P049B
EGR B Flow Insufficient Detected
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. Circuit B is the second EGR path; on diesels with two circuits it is the low-pressure EGR, which takes exhaust after the particulate filter and feeds it in before the turbo compressor (GM diesels 2016–18, FCA's 2.2 and 3.0 diesels). P049B means too little flow in circuit B: with the low-pressure valve open the module expects a change in fresh air mass or manifold pressure, or a modelled EGR volume, and the actual flow stays below the threshold. FCA documents it on the 3.0-litre EcoDiesel third generation in the 2020 Ram 1500, partly as a false trigger fixed by a software update; thresholds are not published.
Possible causes
- Software or calibration (false trigger) high
- Low-pressure EGR valve sooted or stuck closed high
- Low-pressure EGR cooler or line blocked medium
- Implausible sensors (air mass, pressure difference) low
Symptoms
- Check engine light on
- Sluggish acceleration (FCA bulletin)
- Higher NOx
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P049B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.