P0497
EVAP System Low Purge Flow
The evaporative emission (EVAP) system stores fuel vapour from the tank in a charcoal canister; a purge valve lets the engine draw it off, and a vent valve opens the canister to fresh air. P0497 is the counterpart of P0496: the module purges but sees too little or no purge flow, judged indirectly from fuel trim, idle control or tank vacuum – CARB requires missing purge flow to be detected. Code-specific use is documented only by Land Rover (5.0-litre V8) and in a GM fault group for systems with a sealed tank (Volt, ELR); standard GM and Ford systems use other codes, such as P0455. The canister is then not purged and saturates.
Possible causes
- Purge valve stuck closed, does not open high
- Purge line off, kinked or blocked (check valve sticking) medium
- Canister or vent filter blocked (e.g. after overfilling) medium
- Vent valve stuck closed low
Symptoms
- Check engine light on
- Fuel smell around the car
- Fuel nozzle clicks off early
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0497
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.