OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P048A

Exhaust Pressure Control Valve A Stuck Closed

An exhaust pressure control valve is an electrically driven flap in the exhaust with a position sensor or end-position switch, usually inside the actuator. Valve A is the first such flap; Bentley's V8 assigns A to bank 1 and B to bank 2. Documented uses are the flap behind the particulate filter of VW's and Audi's 2.0 TDI, which raises back pressure for the low-pressure EGR, and the sound flaps of Audi and Bentley. P048A means valve A is commanded open but its position feedback stays closed. On VW's and Audi's 2.0 TDI of 2009–13 water and road salt corrode the shaft of the low-pressure EGR flap so it sticks; the code appears with P047F, P0477, P048B/P048C and P0401. The bulletins advise removing the flap and checking it moves freely, otherwise replacing it; improved parts were introduced. A closed flap keeps back pressure high.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 8A

Possible causes

  • Flap or flap shaft corroded or coked (stiff) high
  • Flap actuator (motor or gear) faulty or too weak medium
  • Linkage between actuator and flap broken or misadjusted low
  • Position sensor reports wrongly low

Symptoms

  • Check engine light on
  • Flap without function, exhaust sound changed
  • VW/Audi TDI: EGR fault P0401 possible

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P048A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication