OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0485

Fan Power/Ground Circuit

P0485 monitors the supply or ground path of the fan or its control module – not the control line. It is typical of fans with their own module (PWM or LIN), which can report undervoltage or a missing ground. The high currents involved, often 20–60 A, make contact resistance at ground and supply connections and fuse holders the main cause. No manufacturer table available to us lists P0485, so thresholds and warning-lamp behaviour remain open; CARB requires output components to be monitored. The fan then runs intermittently or not at all.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 85

Possible causes

  • Fan or fan module ground loose, corroded or broken high
  • Fan fuse blown or fuse holder overheated or corroded high
  • Relay power contact burnt – voltage drop under load medium
  • Connector at the fan scorched, water ingress medium
  • Fan control module faulty low

Symptoms

  • Warning lamp (depending on the maker)
  • Fan does not run or only intermittently
  • Overheating at standstill, weak air conditioning
  • Possibly burnt smell or discoloured connector

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0485

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication