P0484
Fan Circuit Current High
P0484 monitors the current drawn in the fan's load circuit: if it exceeds a threshold – blocked or stiff motor, shorted turns, a short in the load circuit – the code sets. This is only possible where the fan runs on a current-measuring semiconductor driver or fan module; plain relay circuits do not measure load current. Supplier patents (Bosch and others) describe current limiting or switch-off after a few seconds of overcurrent, ignoring the inrush current. No manufacturer table available to us lists P0484, so thresholds and warning-lamp behaviour remain open; CARB requires output components to be monitored.
Possible causes
- Fan motor stiff (bearing damage) or blocked (foreign object, ice, bent blade) high
- Shorted turns or worn brushes in the fan motor medium
- Short in the load circuit (pinched or chafed wire) medium
- Fan control module faulty (wrong current measurement) low
Symptoms
- Warning lamp (depending on the maker)
- Fan does not run, runs only briefly or at reduced power
- Humming or grinding at the fan, possibly blown fan fuse
- Overheating at standstill
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0484
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.