OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0483

Fan Rationality Check

Two kinds of cooling fan carry these codes: electric fans switched by relays or driven by a PWM/LIN fan module with speed feedback, and engine-driven fans with an electronically controlled viscous clutch, whose speed a Hall sensor reports – GM calls them EV fans, meaning electro-viscous, not electric vehicle. P0483 checks the fan's function, not its circuit. With a speed sensor (GM viscous fans) commanded and actual speed are compared: GM's Duramax diesels of 2014–18 set it at more than ±500 rpm for at least 120 s, GM petrol SUVs and pick-ups of 2004–06 at more than 1000 rpm – MIL after two trips. Without a sensor Subaru (and the Saab 9-2X) judges indirectly: if coolant at 100 °C or more does not fall within 5 minutes at idle with the fan on, the code sets after two trips. Ford's OBD summaries do not contain it.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 83

Possible causes

  • Viscous clutch worn or leaking, or its solenoid faulty – fan does not reach or leave target speed high
  • Electric fan motor stiff or worn, or fan blocked medium
  • Fan speed sensor or wiring giving a wrong value medium
  • Radiator or condenser clogged, coolant low (Subaru logic) low
  • Drive belt slipping (belt-driven viscous fan) low

Symptoms

  • Check engine light on (after two trips)
  • Constant fan roar, or temperature rise at standstill
  • Air conditioning weak at low speed

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0483

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication