P0482
Fan 3 Control Circuit
The engine module switches cooling fan stages through relays, pulling each relay coil to ground. P0482 concerns the control circuit of the third stage or relay: with the driver off the line should sit at battery voltage through the coil, and the internal pull-up level means an open circuit (Saab ME9: more than 1 s, 10–18 V, engine running). On the GM-based Saab 9-5 of 2011 it is relay 3 (medium stage) of a two-fan network, with shorts reported as P0695/P0696. GM tables list P0482 only in fault groups; Ford's OBD summaries do not contain it. One fan stage then fails.
Possible causes
- Fan relay 3 faulty (coil open) or not seated properly high
- Control wire open or high-resistance, corroded or backed-out pins high
- Relay coil supply missing (fuse, supply wire) medium
- Driver in the engine module low
Symptoms
- Check engine light on
- One fan stage fails – temperature rises in traffic or when towing
- Air conditioning weaker at standstill
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0482
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.