OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P047F

Exhaust Pressure Control Valve A Stuck Open

The exhaust pressure control valve is a flap in the exhaust: on older Navistar/Ford diesels a warm-up flap that raises back pressure when cold, on Ram and others an exhaust brake, on VW's 2.0 TDI a flap that drives the low-pressure EGR, and on Audi and Bentley a sound flap. P047F means valve A stays open although it is commanded to close, detected by the flap's position sensor or by missing back pressure. On VW's 2.0 TDI and Audi's A3 TDI of 2009–12 the code appears with P0477, P048A–P048C and P0401: water and road salt corrode the flap shaft so the flap sticks; improved parts were introduced. As the flap drives the low-pressure EGR there, EGR flow is then too low.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 7F

Possible causes

  • Flap shaft corroded or seized high
  • Soot or carbon on the flap medium
  • Actuator or linkage faulty or unhooked medium
  • Position sensor reports wrongly low

Symptoms

  • Check engine light on
  • EGR flow too low (P0401), higher NOx
  • Exhaust brake or warm-up flap without effect, possibly louder exhaust

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P047F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication