OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P047E

Exhaust Pressure Sensor B Circuit Intermittent/Erratic

The exhaust pressure sensor measures the pressure ahead of the turbine or in the manifold (Ford: turbine upstream pressure, Cummins: exhaust manifold pressure, older Ford diesels: EBP). The module uses it to calculate EGR flow, to control the variable turbine and engine braking, and to protect against overpressure. No manufacturer document available to us uses sensor B – it would be a second sensor, for example on bank 2 of a twin-turbo engine; the description mirrors sensor A. P047E means the signal of sensor B jumps or deviates from the model in operation (for sensor A Ford uses more than 500 kPa or below −100 kPa for 2 s).

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 7E

Possible causes

  • Loose contact at connector or wire near the hot manifold high
  • Sensing tube partly blocked (sluggish, jumping values) medium
  • Engine module software (Ford 6.7, 2018) medium
  • Sensor faulty medium

Symptoms

  • Check engine light on
  • EGR and turbo control on a substitute value, possibly reduced power
  • Exhaust brake or warm-up flap without function

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P047E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication