P047D
Exhaust Pressure Sensor B Circuit High
The exhaust pressure sensor measures the pressure ahead of the turbine or in the manifold (Ford: turbine upstream pressure, Cummins: exhaust manifold pressure, older Ford diesels: EBP). The module uses it to calculate EGR flow, to control the variable turbine and engine braking, and to protect against overpressure. No manufacturer document available to us uses sensor B – it would be a second sensor, for example on bank 2 of a twin-turbo engine; the description mirrors sensor A. P047D means the signal voltage of sensor B is above its limit (for sensor A Ford uses 4.8 V).
Possible causes
- Signal wire open or sensor ground open high
- Signal shorted to 5 V or battery voltage medium
- Sensor faulty internally medium
- Connector loose or corroded medium
Symptoms
- Check engine light on
- EGR and turbo control on a substitute value, possibly reduced power
- Exhaust brake or warm-up flap without function
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P047D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.