OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0476

Exhaust Pressure Control Valve A Range/Performance

The exhaust pressure control valve is a flap in the exhaust: on older Navistar/Ford diesels a warm-up flap that raises back pressure when cold, on Ram and others an exhaust brake, on VW's 2.0 TDI a flap that drives the low-pressure EGR, and on Audi and Bentley a sound flap. P0476 is the function check: the valve does not reach its target position or the expected back pressure. With the Navistar warm-up flap, the module controls to a target back pressure using the sensor as feedback, so missing pressure despite actuation is a function fault. The only code-specific reference is Ducati's Diavel V4 motorcycle (2023): faulty flap motor movement from a wrongly seated cable bracket, with warning lamp and torque limitation until ignition off.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 76

Possible causes

  • Flap stiff, coked or corroded high
  • Linkage, cable or bracket misadjusted medium
  • Actuator (motor, hydraulic or vacuum) weak medium
  • Exhaust pressure sensor or sensing tube giving wrong feedback medium

Symptoms

  • Check engine light on
  • Flap without function: sound unchanged, rattling
  • Diesel: longer warm-up, exhaust brake weak or EGR faults

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0476

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication