P0474
Exhaust Pressure Sensor A Circuit Intermittent/Erratic
The exhaust pressure sensor measures the pressure ahead of the turbine or in the manifold (Ford: turbine upstream pressure, Cummins: exhaust manifold pressure, older Ford diesels: EBP). The module uses it to calculate EGR flow, to control the variable turbine and engine braking, and to protect against overpressure. P0474 covers jumps of sensor A – and at Ford diesels more: in operation the measured pressure is compared with a back pressure model, and a deviation above 500 kPa or below −100 kPa for 2 s sets the code (1300–2400 rpm, warm engine). Ford petrol engines include it in the electrical checks (5 s). A Ford bulletin fixed P0474 on the 2018 6.7-litre with a software update.
Possible causes
- Loose contact at connector or wire near the hot manifold high
- Sensing tube partly blocked (sluggish, jumping values) medium
- Engine module software (Ford 6.7, 2018) medium
- Sensor faulty medium
Symptoms
- Check engine light on
- EGR and turbo control on a substitute value, possibly reduced power
- Exhaust brake or warm-up flap without function
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0474
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.