OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0472

Exhaust Pressure Sensor A Circuit Low

The exhaust pressure sensor measures the pressure ahead of the turbine or in the manifold (Ford: turbine upstream pressure, Cummins: exhaust manifold pressure, older Ford diesels: EBP). The module uses it to calculate EGR flow, to control the variable turbine and engine braking, and to protect against overpressure. P0472 means the signal voltage is below its limit – Ford diesels below 0.1 V for 2 s, Ford petrol engines below 0.21 V for 5 s. The cause is a signal shorted to ground, an interrupted 5 V reference or a faulty sensor; on Ford petrol engines the code must be clear before the EGR valve and hose checks run.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 72

Possible causes

  • Signal wire shorted to ground high
  • 5 V reference open or shorted (often shared with other sensors) medium
  • Sensor faulty internally medium
  • Connector damaged by heat or corrosion medium

Symptoms

  • Check engine light on
  • EGR and turbo control on a substitute value, possibly reduced power
  • Exhaust brake or warm-up flap without function

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0472

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication