P046F
EGR Sensor B Circuit Intermittent/Erratic
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. Which part EGR sensors A and B are depends on the maker: sensor A is usually the position sensor of EGR valve A; GM's Duramax diesels of 2017/18 use sensor B for the coolant temperature sensor at the inlet of the high-pressure EGR cooler, FCA for the position sensor of the low-pressure valve. P046F means jumps or dropouts of sensor B. GM's Duramax diesels set it when the value leaves a narrowing window around the last valid reading – 40 of 50 samples of 100 ms, MIL after two trips. A substitute value is then used and EGR cooler monitoring is suspended. Usually a loose contact or broken wire is the cause.
Possible causes
- Loose contact at the sensor connector high
- Chafed wire or vibration break medium
- Sensor faulty internally medium
- Engine module low
Symptoms
- Check engine light on, may come and go
- Usually no change in driving
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P046F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.