P046B
Catalyst Temperature Sensor 1/2 Correlation Bank 2
Some engines measure the catalyst temperature with sensors instead of only modelling it. P046B compares catalyst temperature sensors 1 and 2 of bank 2 (the side without cylinder 1): both are electrically valid, but their readings do not match – for example they differ after a long stop, or the difference does not fit the operating state. No manufacturer document available to us uses this code; FCA's EcoDiesel has only one such sensor per bank, and most makers handle exhaust temperature sensors and their correlation under EGT codes such as P0544 ff or P24C2. The description follows CARB's plausibility requirement for input components.
Possible causes
- One of the two sensors drifting (soot on the tip, ageing) high
- Sensors fitted or connected the wrong way round medium
- Contact resistance at one sensor's connector medium
- Exhaust leak between the sensors low
Symptoms
- Check engine light on
- Usually no change in driving
- Diesel: filter regeneration possibly changed
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P046B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.