OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0461

Fuel Level Sensor A Circuit Range/Performance

The fuel level sensor is a float on a resistor track in the tank unit. It is no emission part, but other monitors depend on it – the EVAP leak tests, for example, need at least 15 % fuel – so CARB requires it to be monitored and the usual exemption from the warning lamp does not apply. P0461 is the plausibility check of sensor A within its valid signal range. GM compares the level change with calculated fuel use: less than 3 l change after 22 l (2018) or 38.2 l (2016) consumed sets the code, MIL after two trips. Ford reads it differently, as a noisy signal with jumps above 40 %. On the Saab 9-4X the gauge then drops to empty and the low-fuel lamp comes on. A GM bulletin names overfilling and frequent topping up as a false trigger.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 61

Possible causes

  • Resistor track or wiper worn or dirty (sulphur deposits), arm sticking high
  • Float deformed or soaked, or tank deformed medium
  • Overfilling or frequent topping up (no defect) medium
  • Contact resistance at connectors (occasional jumps) low

Symptoms

  • Fuel gauge wrong, stuck or jumping
  • Range display and low-fuel warning wrong
  • Check engine light (depending on the maker)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0461

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication