OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P045E

EGR B Control Stuck Open

Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. EGR B is a second EGR valve next to valve A – on diesels with two EGR circuits the low-pressure valve, which takes exhaust after the particulate filter and feeds it in before the turbo compressor. GM's diesels of 2016–18 and FCA's 2.2-litre diesel in the Jeep Wrangler use it. P045E means valve B does not close: its actual position stays above the target despite the close command. On FCA's 2.2-litre diesel in the Jeep Wrangler, deposits in the low-pressure valve cause it; the bulletin prescribes a cleaning routine of nine ignition cycles that moves the valve repeatedly. Another FCA bulletin shows P045E following a position sensor fault (P0407/P0408). Too much EGR causes misfire, lack of power and smoke.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 5E

Possible causes

  • Soot or condensate deposits in the low-pressure valve high
  • Valve position sensor fault as the trigger medium
  • Actuator gear or return spring faulty medium
  • Foreign matter or filter debris in the low-pressure circuit low

Symptoms

  • Check engine light on
  • Lack of power, rough running, misfire
  • Possibly black smoke

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P045E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication