OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P045D

EGR B Control Circuit High

Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. EGR B is a second EGR valve next to valve A – on diesels with two EGR circuits the low-pressure valve, which takes exhaust after the particulate filter and feeds it in before the turbo compressor. GM's diesels of 2016–18 and FCA's 2.2-litre diesel in the Jeep Wrangler use it. P045D means the drive circuit of valve B is shorted to the supply, or the actuator draws overcurrent with the driver on (comparable to P0490 for valve A). The driver is switched off and EGR B stays inactive. GM lists this code among those that switch off the low-pressure EGR position control, but publishes no thresholds for it; the description follows the comparable valve A checks and CARB, which requires output circuits to be monitored.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 5D

Possible causes

  • Control wire shorted to a supply wire high
  • Actuator motor shorted internally (overcurrent) medium
  • Moisture or corrosion in the connector medium
  • Engine module low

Symptoms

  • Check engine light on
  • Low-pressure EGR switched off, possibly higher NOx
  • Usually no change in driving

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P045D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication