P045B
EGR B Control Circuit Range/Performance
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. EGR B is a second EGR valve next to valve A – on diesels with two EGR circuits the low-pressure valve, which takes exhaust after the particulate filter and feeds it in before the turbo compressor. GM's diesels of 2016–18 and FCA's 2.2-litre diesel in the Jeep Wrangler use it. P045B means the drive circuit of valve B is electrically valid, but the feedback – current, voltage or position response – does not match the command. No manufacturer document available to us uses this code; the description follows the valve A counterpart P0404 and CARB, which requires output functions to be checked where feasible. Typical is a coked, stiff valve.
Possible causes
- Valve B coked or stiff high
- Contact resistance in connector or wiring medium
- Actuator motor worn internally medium
- Engine module software or calibration low
Symptoms
- Check engine light on
- Low-pressure EGR switched off, possibly higher NOx
- Usually no change in driving
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P045B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.