P044D
EGR Sensor C Circuit High
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. What EGR sensor C is depends on the maker: on Ford petrol engines from 2020 it is the DPFE sensor, which measures the pressure drop across an orifice in the EGR pipe (sensor A there is the valve position sensor); GM diesels assign it to the position sensor of a low-pressure EGR valve, but only within fault groups. P044D means its signal is above the upper limit. Ford petrol engines from 2020 set it above 4.65 V for 5 s, beyond the measuring range that ends at 4.5 V (about +18 kPa) – typically an open sensor ground, a signal shorted to 5 V or positive, or a faulty sensor. EGR flow, hose and cooler checks are then suspended; MIL after two trips.
Possible causes
- Sensor ground open high
- Signal shorted to 5 V or positive medium
- Sensor faulty internally medium
- Engine module low
Symptoms
- Check engine light on
- Usually no change in driving
- EGR readiness not set, EGR possibly switched off
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P044D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.